The Combination of Entropy and Simple Additive Weighting (Saw) Methods in Determining the Best Principal

Authors

  • Rahmat Rahmat Universitas Islam Kebangsaan Indonesia

DOI:

https://doi.org/10.51179/tika.v7i2.1264

Keywords:

Best Principal, Decision Support System, Entropy, Method Combination, Simple Additive Weighting

Abstract

The education sector is one of the sectors that apply computerized information technology the most. This certainly has an impact on the continuous development of computer technology both in terms of hardware and software. One of the cases in the field of education that involves computers is the selection of the best principal using the decision support method. Decision support method is a method that can be used to provide recommendations on alternatives that have been previously determined based on predetermined criteria. In this study, a decision support model was developed using a combination of two methods, namely the Entropy and Simple Additive Weighting (SAW) methods. The entropy method is used to calculate the entropy value and normalized entropy, while the SAW method is used to normalize and rank alternatives based on the existing criteria. The results obtained are that the use of these two methods is considered better than using only one method, both entropy and SAW

Downloads

Download data is not yet available.

References

Apriani, N.D., Krisnawati, N., Fitrisari, Y., 2021. Implementasi Sistem Pendukung Keputusan Dengan Metode SAW Dalam Pemilihan Guru Terbaik. Journal Automation Computer Information System 1. https://doi.org/10.47134/jacis.v1i1.5

Devianto, Y., Dwiasnati, S., 2020. Kerangka Kerja Sistem Kecerdasan Buatan dalam Meningkatkan Kompetensi Sumber Daya Manusia Indonesia. Jurnal Telekomunikasi dan Komputer 10. https://doi.org/10.22441/incomtech.v10i1.7460

Efiriyanto, B., 2016. Sistem Pendukung Keputusan Menggunakan Metode Simple Additive Weighting (SAW) Untuk Menentukan Karyawan Terbaik Pada Dealer Motor Berbasis Web. Skripsi Fakultas Komunikasi dan Informatika UMS.

Eriana, E.S., 2020. Pemilihan Ketua Himtif Universitas Pamulang Dengan Metode Simple Additive Weighting (SAW). Jurnal Ilmu Komputer 3.

Fitriani, F., Muslem R, I., 2021. E-Absensi Mahasiswa Fakultas Ilmu Komputer Universitas Almuslim Berbasis Web. JURNAL TIKA 5. https://doi.org/10.51179/tika.v5i3.141

Ghufron, M.A., 2018. Revolusi Industri 4.0: Tantangan, Peluang, Dan Solusi Bagi Dunia Pendidikan. Seminar Nasional dan Diskusi Panel Multidisiplin Hasil Penelitian dan Pengabdian Kepada Masyarakat 2018 1.

Harahap, A.S., Tulus, Budhiarti, E., 2017. Penerapan Metode Entropy dan Metode Promethee dalam Merangking Kualitas Getah Karet. Pelita Informatika 6.

Hidayat, A., Malik, R.F., Nurmaini, S., 2020. Group Decision Support System (GDSS) dengan Metode Entropy untuk Menentukan Prioritas Antrian Layanan Rumah Sakit Menggunakan Multiple Channel Model (M/M/s). JATISI (Jurnal Teknik Informatika dan Sistem Informasi) 7. https://doi.org/10.35957/jatisi.v7i2.342

Liesnaningsih, L., Oklawati, O., Kasoni, D., 2019. SISTEM PENDUKUNG KEPUTUSAN PENILAIAN KARYAWAN TERBAIK MENGGUNAKAN METODE SIMPLE ADDITIVE WEIGHTING PADA PT. TRANS RETAIL INDONESIA. JIKA (Jurnal Informatika) 3. https://doi.org/10.31000/jika.v3i2.2202

Masri, M., 2016. Penentuan Karyawan Terbaik Dengan Metode Simple Additive Weighting (PDAM Tirta Silaupiasa). JET (Journal of Electrical Technology) 1.

Muslem R, I., 2021. Sistem Pendeteksi Kebocoran Gas Rumah Tangga Menggunakan Mq-2 Sensor Dan Mikrokontroler. JURNAL TIKA 6. https://doi.org/10.51179/tika.v6i02.457

Noviansyah, M.R., Suharso, W., Chandranegara, D.R., Azmi, M.S., Hermawan, M., 2019. Sistem Pendukung Keputusan Pemilihan Laptop Pada E-Commerce Menggunakan Metode Weighted Product. Prosiding SENTRA (Seminar Teknologi dan Rekayasa) 0.

Nugraha, W., Syarif, M., Dharmawan, W.S., 2018. PENERAPAN METODE SDLC WATERFALL DALAM SISTEM INFORMASI INVENTORI BARANG BERBASIS DESKTOP. JUSIM (Jurnal Sistem Informasi Musirawas) 3. https://doi.org/10.32767/jusim.v3i1.246

Pamugar, H., Winarno, W.W., Najib, W., 2014. Model Evaluasi Kesuksesan dan Penerimaan Sistem Informasi E-Learning pada Lembaga Diklat Pemerintah. Scientific Journal of Informatics 1. https://doi.org/10.15294/sji.v1i1.3638

Ristiana, R., Jumaryadi, Y., 2021. Sistem Pendukung Keputusan Pemilihan Paket Wedding Organizer Menggunakan Metode SAW (Simple Additive Weighting). Jurnal Sisfokom (Sistem Informasi dan Komputer) 10. https://doi.org/10.32736/sisfokom.v10i1.946

Sari, S.W., Purba, B., 2019. Sistem Pendukung Keputusan Pemilihan Ketua Danru Terbaik Menggunakan Metode ARAS. Seminar Nasional Teknologi Komputer & Sains (SAINTEKS) SAINTEKS 2019.

Sitinjak Daniel Dido Jantce TJ, M., Suwita, J., 2020. Analisa Dan Perancangan Sistem Informasi Administrasi Kursus Bahasa Inggris Pada Intensive English Course Di Ciledug Tangerang. Ipsikom 8.

Tika, M.F., 2021. Sistem Pendukung Keputusan Seleksi Penerima Program Bantuan Sosial Menggunakan Metode SAW. Emitor: Jurnal Teknik Elektro 21. https://doi.org/10.23917/emitor.v21i2.13956

Usmaedi, U., Fatmawati, P.Y., Karisman, A., 2020. PENGEMBANGAN MEDIA PEMBELAJARAN BERBASIS TEKNOLOGI APLIKASI AUGMENTED REALITY DALAM MENINGKATKAN PROSES PENGAJARAN SISWA SEKOLAH DASAR. Jurnal Educatio FKIP UNMA 6. https://doi.org/10.31949/educatio.v6i2.595

Published

2022-08-10

How to Cite

Rahmat, R. (2022). The Combination of Entropy and Simple Additive Weighting (Saw) Methods in Determining the Best Principal. Jurnal Tika, 7(2), 129–138. https://doi.org/10.51179/tika.v7i2.1264

Similar Articles

1 2 3 4 > >> 

You may also start an advanced similarity search for this article.